Solid Hardwood
- White & red oak, hickory, walnut
- Site-finished — sand, stain, seal
- Refinishable 5–8 times over its life
- Best for: main living areas, lifelong homes
Tile & Hard-Surface Flooring · Our Specialty
The tile and flooring crew Idaho homeowners actually trust.
Twenty years of nothing but tile and hard-surface flooring — porcelain, marble, solid hardwood, engineered, LVP, and laminate. From a single backsplash to a 4,000 sq ft floor plan, every piece is set to the same obsessive standard.
Tile
Every surface, every material, set right.
Schluter & Wedi certified waterproofing, TCNA/ANSI compliant installation methods, and grout joints that line up across every threshold.
Porcelain & Ceramic Tile
- Large format (24×48, slabs)
- Wood-look plank tile
- Hexagon, herringbone, basket-weave
- Backsplashes & feature walls
Natural Stone
- Marble (Carrara, Calacatta)
- Travertine & limestone
- Slate & quartzite
- Honed, polished, leathered finishes
Shower & Wet Areas
- Curbless walk-in showers
- Schluter Kerdi & Wedi waterproofing
- Linear drains
- Steam shower assemblies
Hard-Surface Flooring
Solid hardwood, engineered, LVP, and laminate.
We don't sell carpet. We install the four hard-surface categories homeowners actually live well on — sized, spec'd, and laid for your room, your subfloor, and your life.
Engineered Hardwood
- Real wood top layer on plywood core
- Wide plank (7"+), wire-brushed options
- Dimensionally stable for basements & dry winters
- Best for: whole home, including basements
Luxury Vinyl Plank (LVP / SPC)
- 100% waterproof
- Click-lock or glue-down
- Pet-, scratch-, and dent-resistant
- Best for: kitchens, baths, basements, full main level
Laminate
- AC4 & AC5 commercial-rated wear layers
- Water-resistant (not for full wet areas)
- High-fidelity wood and stone visuals
- Best for: bedrooms, dining, busy households
Material Comparison
Pick the right floor for the right room.
| Feature | Solid Hardwood | Engineered | LVP / SPC | Laminate |
|---|---|---|---|---|
| Installed cost / sq ft | $11–$18 | $9–$16 | $5–$9 | $5–$8 |
| Refinishable | Yes (5–8×) | Yes (1–2×) | No | No |
| Waterproof | No | No | Yes | Water-resistant |
| OK for basements | No | Yes | Yes | Limited |
| OK in bathrooms | No | No | Yes | No |
| Pet & scratch resistance | Medium | Medium-high | High | High |
| Typical lifespan | 50–100 yrs | 20–40 yrs | 20–30 yrs | 15–25 yrs |
| Real wood feel | Yes | Yes | No | No |
Why Our Floors Last
It's all in the prep.
A tile or floor install only ever looks as good as what's underneath it. Before a single piece goes down, we self-level substrates to 1/8" tolerance, lay uncoupling and waterproofing membranes per TCNA standards, acclimate hardwood for 7+ days, and dry-lay every layout to verify cuts. It's slower. It's why our work outlasts everyone else's.
- TCNA & ANSI compliant tile installation methods
- Schluter Ditra & Kerdi-certified installers
- NWFA-trained hardwood specialists
- Moisture-tested subfloors before every install
- Written craftsmanship warranty on every job
Bathroom Tile Specialty
Curbless showers built to stay dry for decades.
Waterproofing failures are the #1 reason bathroom remodels fail in Idaho's freeze-thaw climate. We build every wet area with a fully bonded waterproofing system — not just a pan liner.
Plan Your Bathroom